Default: .01 Inches
The unit if measurement used in this section
•.01 Inches - Units are in hundredths of an inch
•.1 Millimeters - Units are in tenths of a millimeter
[Advanced Features] Units=.01 Inches |
See also: Printer Overrides
Default: 0
Customize the desired measurement for the size of the printer-supplied left and right edge on your output.
•0 - 100 - range when units is set to .01 Inches
•0 - 254 - range when units is set to .1 Millimeters
•0.000in - 1.000in - range in inches.
•0.000cm - 2.540cm - Range in centimeters
[Advanced Features] Hardware Margin Left=1100 |
See also: Printer Overrides
Default: 0
Customize the desired measurement for the size of the printer-supplied top and bottom edge on your output.
•0 - 100 - range when units is set to .01 Inches
•0 - 254 - range when units is set to .1 Millimeters
•0.000in - 1.000in - range in inches.
•0.000cm - 2.540cm - Range in centimeters
[Advanced Features] Hardware Margin Top=0 |
See also: Printer Overrides
Default: 0
Set this to 1 to have PDF Image Printer use the custom paper size defined for the output file. This setting overrides any other paper size selection that you have set on the application.
[Advanced Features] Custom Paper Enable=0 |
See also: Printer Overrides
Default: 850
Desired measurement for the width of the new paper size.
•0.25 - 8000000 - range when units is set to .01 Inches
•64 - 20000000 - range when units is set to .1 Millimeters
•0.250in - 80000.000in - range in inches.
•0.640cm - 200000.000cm - Range in centimeters
[Advanced Features] Custom Paper Width=850 |
See also: Printer Overrides
Default: 1100
Desired measurement for the height of the new paper size.
•0.25 - 8000000 - range when units is set to .01 Inches
•64 - 20000000 - range when units is set to .1 Millimeters
•0.250in - 80000.000in - range in inches.
•0.640cm - 200000.000cm - Range in centimeters
[Advanced Features] Custom Paper Height=1100 |
See also: Printer Overrides
Default: 0
The desired left margin setting for the custom paper size. The combined Left and Right printer area margins must be less than the Width of the custom paper. Dimensions for printer area margins are entered based on a portrait oriented page.
•0 - 8000000 - range when units is set to .01 Inches
•0 - 20000000 - range when units is set to .1 Millimeters
•0.000in - 80000.000in - range in inches.
•0.000cm - 200000.000cm - Range in centimeters
[Advanced Features] Printer Area Margin Left=0 |
See also: Printer Overrides
Default: 0
The desired top margin setting for the custom paper size. The combined Top and Bottom printer area margins must be less than the Height of the custom paper. Dimensions for printer area margins are entered based on a portrait oriented page.
•0 - 8000000 - range when units is set to .01 Inches
•0 - 20000000 - range when units is set to .1 Millimeters
•0.000in - 80000.000in - range in inches.
•0.000cm - 200000.000cm - Range in centimeters
[Advanced Features] Printer Area Margin Top=0 |
See also: Printer Overrides
Default: 0
The desired right margin setting for the custom paper size. The combined Left and Right printer area margins must be less than the Width of the custom paper. Dimensions for printer area margins are entered based on a portrait oriented page.
•0 - 8000000 - range when units is set to .01 Inches
•0 - 20000000 - range when units is set to .1 Millimeters
•0.000in - 80000.000in - range in inches.
•0.000cm - 200000.000cm - Range in centimeters
[Advanced Features] Printer Area Margin Right=0 |
See also: Printer Overrides
Default: 0
The desired bottom margin setting for the custom paper size. The combined Top and Bottom printer area margins must be less than the Height of the custom paper. Dimensions for printer area margins are entered based on a portrait oriented page.
•0 - 8000000 - range when units is set to .01 Inches
•0 - 20000000 - range when units is set to .1 Millimeters
•0.000in - 80000.000in - range in inches.
•0.000cm - 200000.000cm - Range in centimeters
[Advanced Features] Printer Area Margin Bottom=0 |
See also: Printer Overrides
Default: 0
Set this to 1 to extract any text in the file and save the created text file in the same directory and with the same name as the output file.
[Advanced Features] Extract Text=0 |
See also: Text Extraction
Deprecated; all text extraction files are stored in the same location as the output file.
Default: Physical
Sets the layout for the text in outputted text.
•Physical - Match the format of the text in the original file
•Raw - Saves the text in the order in which it was sent to the driver. This may not be the same order in the original file
•None - No formatting is attempted. All text is written to the file as it is received
[Advanced Features] Extract Text Layout=Physical |
See also: Text Extraction
Default: UTF-16
Sets the encoding format for your text file.
•ANSI
•UTF-8
•UTF-16
[Advanced Features] Extract Text Encoding=UTF-16 |
See also: Text Extraction
Default: Windows
Sets the end-of-line encoding for your text file.
•Windows - Lines end with the CRLF (\r\n) line feed
•Mac - Lines end with the LF (\n) line feed
•Unix - Lines end with the CR (\r) line feed
[Advanced Features] Extract Text EOL=Windows |
See also: Text Extraction
Default: 1
Emits a page break, or form feed (\f) in your text file for every page in your original document. Set this to 0 to disable page breaks.
[Advanced Features] Extract Text Emit Page Breaks=1 |
See also: Text Extraction
Deprecated; control strings are no longer supported.
Deprecated; control strings are no longer supported.
Deprecated; control strings are no longer supported.